Don't we generally appear to have a flat tyre at the most inconvenient time? Having a flat tyre and not knowing how to change it can make you feel helpless. Knowing how to change a tyre is an aptitude each individual who drives might as well have. Given below are a few simple steps which will help you be back on the road in no time.
Start with the right gear - Spare tyre, jack, lug wrench.
Park your car on a flat surface - Make sure you apply the emergency brake during this process.
Loosen up the nuts - In the event that your car has a hubcap, remove it so you can get to the lug nuts.Utilize the hubcap to hold the nuts. Take your lug wrench and place it on the tyre's lug nuts. Loosen them up by turning them counterclockwise. The nuts would probably be really tight, so you’ll have to use all your strength to unscrew them. Loosen the nuts a few turns, but don’t take any of them off yet!
Jack the car up! - Refer to the owner’s manual for the right position of the jack. Turn the hand crank at the end of the jack to raise the jack until it comes into contact with your car’s frame. Make sure it’s touching a sturdy spot. Start cranking the jack until the wheel is high enough above the ground to remove the tyre.
Remove the flat tyre - Remove the lug nuts from the wheel. This should be easy as you’ve already loosened them. Remove the flat tyre and lay it flat. You don’t want the wheel to roll into traffic during rush hour and cause any trouble.
Put on your spare tyre - Take your spare tyre and line up the lugs, or bolts, with the holes in the wheel and slide the wheel on. Once the wheel is on, take your lug nuts and tighten them by hand until you meet firm resistance.
Lower the car - Lower the jack until the wheel is firmly on the ground.
Finish tightening your lug nuts - Ensure that the nuts are fastened super tight so that the wheel doesn't come flying off while driving.